This setting can be applied only to tunnels that bind to port 691 (UDP) on both sides. High Performance Settings (optional) – Select the check box. In the Advanced tab, configure the following settings:.Consolidated Shaping – Clear the check box.Dynamic Bandwidth Detection – Select Disabled.In the SD-WAN Bandwidth Protection tab, configure the following settings:.In the Basics tab, configure the following settings:.Create a TINA site-to-site VPN tunnel with a single transport with the following encryption settings:.Do not use wireless network connections to connect to the firewall.Ĭonfigure the VPN tunnel on both firewalls with the following settings:.If that is not possible, up to one switch between the firewall and the test client is acceptable. Connect the test clients directly to the firewall.Do not run performance tests directly on the shell of the firewall unless specifically stated otherwise. Testing must be performed on dedicated clients on both ends.To rule out devices in the local and remote networks, as well as side effects of other services on the firewall, create the following setup: VPN Performance Test Setup Before You Begin Download VPN Performance Testing Form (Microsoft Word).iperf3 is especially critical in that respect because it is inherently single-threaded. Make sure that clients driving the test are powerful enough.Include the completed form when contacting Barracuda Networks Support. Paste the output from each step into the text form and save the result. To collect all relevant information for Barracuda Networks Technical Support, download the Word template form and fill in the required values as you go through the steps.Please note that the VPN throughput results can differ from the values published on the datasheet of CloudGen Firewall F models due to varying test methods and equipment used. The following VPN performance test method provides a guideline for creating a standardized VPN performance testing environment required by Barracuda Networks Technical Support that allows you to identify potential configuration improvements.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |